Vax VZL-6013A Guia do Utilizador descarregar pdf (Página 10)

www.vax.co.uk

general maintenance / troubleshooting

Pivot lower housing and remove clog (Fig.8/4).

To reassemble, be sure tabs are engaged. Pivot the lower

housing closed (Fig.8/5).

Rotate locking ring back round to secure.

9. Troubleshooting

WARNING: To reduce risk of personal injury,

unplug vacuum cleaner before servicing.

PROBLEM: Cleaner won’t run

Cause: Not properly plugged into wall outlet.

Solution: Plug in firmly.

Cause: No electricity in wall outlet.

Solution: Check fuse or breaker.

Cause: On/off switch not turned on.

Solution: Push on/off switch to on.

Cause: Motor thermostat tripped.

Solution: Switch off and unplug the vacuum cleaner.

Leave for one (1) hour. See page 3.

Cause: Blown fuse/tripped breaker.

Solution: Reset circuit breaker or replace fuse.

PROBLEM: Cleaner won't pick up

Cause: Full or clogged dirt container.

Solution: Clean dirt container.

Cause: Clogged nozzle.

Solution: Remove obstruction.

Cause: Clogged dirt inlet.

Solution: Remove suction channel cover and remove

obstruction.

Cause: Clogged hose.

Solution: Remove obstruction.

Cause: Hose not inserted fully.

Solution: Push hose in securely.

Cause: Dirty filters or filter container.

Solution: Clean/change filters or filter container.

PROBLEM: Accessories won't pick up

Cause: Accessories not attached correctly.

Solution: Refer to page 5 for fitting information.

PROBLEM: Brushbar does not turn

Cause: Brushbar blocked.

Solution: Remove blockages.

PROBLEM: Air flow restricted with attachment use

Cause: Attachment use restricts air flow.

Solution: Check attachment.

Cause: New carpet debris clogging air path.

Solution: Remove obstruction.

Fig.8/4

TABS

Fig.8/5

Vax VZL-401AA Magnum User Guide.qxd:VZL-401 User Guide 11/3/09 09:59 Page 10

1 2 ... 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários

Vax VZL-6013A Guia do Utilizador Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com não Vax VZL-6013A